3920 62 19 08 · Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: - only dyed in the mass, or - dyed in the mass and metallised on one side
Section VII · PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF
Sheet for the code
Full sheet on the GUIEX website
Operation
- Direction
- Import
- Date
- 2026-11-16
Duties
- Measure
- Third country duty
- Measure type
- 103
- Applies to
- All origins
- Value
- 6.5 %
- Legal basis
- Regulation No 1789/2003
- From
- 2004-01-01
- Measure
- Autonomous tariff suspension
- Measure type
- 112
- Applies to
- All origins
- Value
- 0 %
- Except
- Belarus
- Russia
- Legal basis
- Regulation 2025/2605
- From
- 2026-01-01
- Footnotes
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
- Measure
- Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms
- Measure type
- 117
- Applies to
- All origins
- Value
- 0 %
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C990
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- C990
- Name
- End use authorisation ships and platforms (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Issued by
- Issued by the customs authority. It is not a letter from the trader.
- Legal basis
- Regulation No 2658/87
- From
- 2016-07-01
- Footnotes
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 22 10, 8903 23 10, 8903 32 10, 8903 33 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in…
- Measure
- Airworthiness tariff suspension
- Measure type
- 119
- Applies to
- All origins
- Value
- 0 %
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C119
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- C119
- Name
- Authorised Release Certificate — EASA Form 1 (Appendix I to Annex I to Regulation (EU) No 748/2012), or equivalent certificate
- Issued by
- Signed by the approved production or maintenance organisation that made or serviced the part.
- Legal basis
- Regulation 2018/1517
- From
- 2018-11-01
- Footnotes
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to…
- Measure
- Low-value consignment customs duty
- Measure type
- 107
- Applies to
- All origins
- Value
- 3.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C127
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Import is not allowed
- Condition
- Presentation of a certificate/licence/document
- Document
- C128
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- C129
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- Y081
- Outcome
- Apply the mentioned duty
- Documents to present
- Legal basis
- Regulation 2026/382
- From
- 2026-11-01
- Footnotes
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446. The merchant product identifier, the non-standardised manufacturer product identifier and, if it exists for t…
- Measure
- Union handling fee
- Measure type
- 800
- Applies to
- All origins
- Value
- 2.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- Y126
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- Y126
- Name
- Goods sold in distance sales
- Legal basis
- Regulation 2026/2108
- From
- 2026-11-01
- Footnotes
- Customs authorities shall collect a Union handling fee of a fixed amount per item for the services to be rendered for handling a request for placing goods under the release for free circulation procedure where those goods are sold in distance sales.
Depends on the country
- Note
- Without a country, measures that depend on origin or destination are grouped. Give the country to see those that apply to a specific operation.
- Measures
- Measure
- Customs Union Duty
- Countries
- AD
- SM
- Türkiye
- Value
- 0 %
- Measure
- Tariff preference
- Countries
- AL
- AM
- Algeria
- BA
- CARIFORUM
- CI
- CM
- Canada
- Central America
- Chile
- Colombia
- EC
- EEA - European Economic Area
- EU-Canada agreement: re-imported goods
- Value
- 0 %
- More countries
- 42
- Measure
- Tariff preference
- Countries
- GSP - General arrangements
- Value
- 3 %
- Measure
- Tariff preference
- Countries
- Mercosur
- Value
- 5.2 %
- Measure
- Preferential tariff quota
- Countries
- Central America
- Colombia
- EC
- Peru
- Value
- 0 %
- Measure
- Import control
- Countries
- Belarus
- Russia
- Ukraine
- Value
- Subject to conditions
National taxes
- VAT
- Rate (%)
- 21
- Name
- Standard
- Reason
- Standard rate: the goods are not among those at a reduced rate
- Legal basis
- Ley 37/1992, art. 90.Uno
- Possible rates
- Rate (%)
- 10
- Reason
- Seeds, fertilisers, plant protection products and other farm inputs
- Condition
- Presentación y envasado aptos para uso agrícola, forestal o ganadero. Quedan excluidas la maquinaria y las herramientas
- Equivalence surcharge
- Rate (%)
- 5.2
- When
- Only if the importer is a retailer under the equivalence surcharge scheme.
- Legal basis
- Ley 37/1992, art. 161
- Special tax on non-reusable plastic packaging
- Name
- Special tax on non-reusable plastic packaging
- Applies
- Possible
- Box 47 code
- 1PL
- Amount
- 0.45
- Unit
- EUR/kg
- Monthly exemption (kg)
- 5
- Explanation
- If they are non-reusable plastic packaging, the kilograms of non-recycled plastic are taxed.
- Legal basis
- Ley 7/2022, art. 78
National controls
- Control
- Pharmaceutical import control (AEMPS)
- Authority
- AEMPS (Spanish Agency of Medicines and Medical Devices)
- Certainty
- May apply if the goods fall within the scope of this control. The national tariff places it on the whole code and it could not be checked against the rules which goods it covers. Otherwise, the goods are declared as not affected (document 1403).
- Documents to present
- Code
- 1306
- Name
- Pharmacy Inspection certificate for goods subject to import control
- If not affected, declare
- Code
- 1403
- Name
- Importer or exporter declaration that the goods are not subject to Pharmacy Inspection control
- Legal basis
- Order SPI/2136/2011
Explanations
- Title
- Low-value consignments
- Text
- A duty of 3 EUR per item on consignments with an intrinsic value of no more than 150 EUR sold at a distance to consumers. An item means the goods in the consignment with the same classification, description and origin. It is temporary, from 1 July 2026 to 1 July 2028, and is laid down in Regulation (EU) 2026/382.
- Title
- Union handling fee
- Text
- A fee of 2 EUR that is only charged if document Y126, goods sold at a distance, is declared. Without Y126 the measure does not apply.
- Title
- Proof of origin
- Text
- Paying the preferential duty requires a proof of origin accepted under the agreement with the country of origin, usually a certificate of origin or a statement on origin by the exporter. Without it the preference does not apply.
Warnings
- The reduced rate only applies while quota 09.7015 has a balance left. The Commission publishes the balance.
- The reduced rate only applies while quota 09.7140 has a balance left. The Commission publishes the balance.
- The reduced rate only applies while quota 09.7501 has a balance left. The Commission publishes the balance.
- The reduced rate only applies while quota 09.7170 has a balance left. The Commission publishes the balance.
Binding tariff information
- This code
- Code
- 3920621908
- Total
- 0
- Valid today
- 0
- CN code (8 digits)
- Code
- 39206219
- Total
- 56
- Valid today
- 9
- HS subheading (6 digits)
- Code
- 392062
- Total
- 507
- Valid today
- 35
Notes
- Type
- Legal note
- Title
- Sección VII · PLÁSTICO Y SUS MANUFACTURAS; CAUCHO Y SUS MANUFACTURAS
- Type
- Legal note
- Title
- Capítulo 39 · PLÁSTICO Y SUS MANUFACTURAS
- Type
- Explanatory note
- Title
- Consideraciones generales
- Type
- Explanatory note
- Title
- Las demás placas, láminas, hojas y tiras, de plástico no celular y sin esfuerzo, estratificación ni soporte o combinación similar con otras materias
Other lines at the same level
- 3920 62 19 05 Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm (declarable code)
- 3920 62 19 28 Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites (declarable code)
- 3920 62 19 32 Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm (declarable code)
- 3920 62 19 38 Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm (declarable code)
- 3920 62 19 48 Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 μm (± 3 μm) (declarable code)
- 3920 62 19 52 Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257 method) (declarable code)
- 3920 62 19 60 Poly (ethylene terephtalate) film: - of a thickness of not more than 20 µm, - coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm (declarable code)
- 3920 62 19 70 Poly(ethylene terephthalate) film in rolls with: -a thickness of 35 μm or more, but not more than 75 μm, -a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD), -an elongation at break of 400 % or more in MD and 30 % or more in TD, -a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %, -a dynamic heat shrinkage (between 55 °C and 70 °C ) in TD of not more than 20 percentage points, -a light transmittance of 85 % or more, -a haze ratio of not more than 6 %, -a surface tension of 38 mN/m or more, -a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³, -a shelf life declared by the manufacturer of not less than 12 months (declarable code)
- 3920 62 19 79 Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm (declarable code)
- 3920 62 19 85 Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: -a total thickness of 300 µm or more, but not more than 330 µm, -a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882), -a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes, -a low water vapor permeability of 2,5 g/m²•d or less, and -a high breakdown voltage of 18 kV or more and -a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules (declarable code)
- 3920 62 19 99 Other (declarable code)
Data as of 2026-11-13.