Y249 · Exemptions from prohibition by virtue of Article 6. (d) and (e) (Reg 267/2012)
Document code Y249 for the customs declaration.
Tariff lines that require it
Today measures carry it on 94 lines of the EU customs tariff (TARIC). Import: 0. Export: 94. A measure on a line also applies to the codes below it. These are the first 60.
- 3704 00 10 00 Plates and film (declarable code)
- 3705 00 90 00 Other (declarable code)
- 3801 10 00 00 Artificial graphite
- 3801 90 00 00 Other
- 4901 10 00 00 In single sheets, whether or not folded (declarable code)
- 4901 99 00 00 Other (declarable code)
- 4906 00 00 00 Plans and drawings for architectural, engineering, industrial, commercial, topographical or similar purposes, being originals drawn by hand; handwritten texts; photographic reproductions on sensitised paper and carbon copies of the foregoing (declarable code)
- 4911 99 00 00 Other (declarable code)
- 7219 21 10 00 Containing by weight 2,5 % or more of nickel (declarable code)
- 7219 22 10 00 Containing by weight 2,5 % or more of nickel
- 7219 23 00 00 Of a thickness of 3 mm or more but less than 4,75 mm
- 7219 24 00 00 Of a thickness of less than 3 mm
- 7219 31 00 00 Of a thickness of 4,75 mm or more
- 7219 32 10 00 Containing by weight 2,5 % or more of nickel
- 7219 33 10 00 Containing by weight 2,5 % or more of nickel
- 7219 34 00 00 Of a thickness of 0,5 mm or more but not exceeding 1 mm
- 7219 35 00 00 Of a thickness of less than 0,5 mm
- 7219 90 00 00 Other
- 7220 11 00 00 Of a thickness of 4,75 mm or more
- 7220 12 00 00 Of a thickness of less than 4,75 mm
- 7220 20 21 00 2,5 % or more of nickel
- 7220 20 29 00 Less than 2,5 % of nickel
- 7220 20 41 00 2,5 % or more of nickel
- 7220 20 49 00 Less than 2,5 % of nickel
- 7220 20 81 00 2,5 % or more of nickel
- 7220 90 00 00 Other
- 7222 11 00 00 Of circular cross-section
- 7222 19 00 00 Other
- 7222 20 00 00 Bars and rods, not further worked than cold-formed or cold-finished
- 7222 30 00 00 Other bars and rods
- 7225 11 00 00 Grain-oriented
- 7225 19 00 00 Other
- 7225 40 12 00 Of tool steel
- 7225 40 40 00 Of a thickness exceeding 10 mm (declarable code)
- 7225 40 60 00 Of a thickness of 4,75 mm or more but not exceeding 10 mm
- 7225 40 90 00 Of a thickness of less than 4,75 mm (declarable code)
- 7225 50 80 00 Other (declarable code)
- 7225 91 00 00 Electrolytically plated or coated with zinc
- 7225 92 00 00 Otherwise plated or coated with zinc
- 7225 99 00 00 Other
- 7226 11 00 00 Grain-oriented
- 7226 91 20 00 Of tool steel (declarable code)
- 7226 91 99 00 Of a thickness of less than 4,75 mm (declarable code)
- 7226 92 00 00 Not further worked than cold-rolled (cold-reduced)
- 7226 99 70 00 Other
- 7228 30 61 00 80 mm or more (declarable code)
- 7228 30 69 00 Less than 80 mm
- 7228 30 70 00 Of rectangular (other than square) cross-section, hot-rolled on four faces (declarable code)
- 7228 30 89 00 Other (declarable code)
- 7228 40 00 00 Other bars and rods, not further worked than forged
- 7228 50 20 00 Of tool steel (declarable code)
- 7228 50 61 00 80 mm or more (declarable code)
- 7228 50 69 00 Less than 80 mm (declarable code)
- 7228 50 80 00 Other (declarable code)
- 7228 60 00 00 Other bars and rods
- 7304 41 00 00 Cold-drawn or cold-rolled (cold-reduced)
- 7304 49 00 00 Other
- 7304 51 81 00 Precision tubes (declarable code)
- 7304 51 89 00 Other
- 7304 59 82 00 Of an external diameter not exceeding 168,3 mm
Measures that carry it
- Export control