8708 99 97 27 · Inner pole electromagnet core used in Magneto-Rheological engine mounts to reduce shocks and for isolation and damping in passenger cars: -of a powder metal assembly, -with a diameter of not more than 90,95 mm, -with an overall height of 24,5 mm, -impregnated with sealant, -zinc plated
Section XVII · VEHICLES, AIRCRAFT, VESSELS AND ASSOCIATED TRANSPORT EQUIPMENT
Sheet for the code
Full sheet on the GUIEX website
Operation
- Direction
- Import
- Date
- 2026-11-16
Duties
- Measure
- Third country duty
- Measure type
- 103
- Applies to
- All origins
- Value
- 3.5 %
- Legal basis
- Regulation No 1549/2006
- From
- 2007-01-01
- Measure
- Autonomous tariff suspension
- Measure type
- 112
- Applies to
- All origins
- Value
- 0 %
- Except
- Belarus
- Russia
- Legal basis
- Regulation 2026/1463
- From
- 2026-07-01
- Footnotes
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
- Measure
- Low-value consignment customs duty
- Measure type
- 107
- Applies to
- All origins
- Value
- 3.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C127
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Import is not allowed
- Condition
- Presentation of a certificate/licence/document
- Document
- C128
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- C129
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- Y081
- Outcome
- Apply the mentioned duty
- Documents to present
- Legal basis
- Regulation 2026/382
- From
- 2026-11-01
- Footnotes
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446. The merchant product identifier, the non-standardised manufacturer product identifier and, if it exists for t…
- Measure
- Union handling fee
- Measure type
- 800
- Applies to
- All origins
- Value
- 2.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- Y126
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- Y126
- Name
- Goods sold in distance sales
- Legal basis
- Regulation 2026/2108
- From
- 2026-11-01
- Footnotes
- Customs authorities shall collect a Union handling fee of a fixed amount per item for the services to be rendered for handling a request for placing goods under the release for free circulation procedure where those goods are sold in distance sales.
Restrictions and controls
- Measure
- Import control on ozone-depleting substances
- Measure type
- 726
- Applies to
- All origins
- Value
- Subject to conditions
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- L100
- Outcome
- Entry into free circulation allowed
- Condition
- Presentation of a certificate/licence/document
- Document
- Y792
- Outcome
- Entry into free circulation allowed
- Condition
- Presentation of a certificate/licence/document
- Outcome
- The entry into free circulation is not allowed
- Condition
- Other conditions
- Document
- Y791
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y789
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y790
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y792
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Outcome
- Import/export not allowed after control
- Condition
- Other conditions
- Document
- Y797
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y798
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y799
- Outcome
- Import/export allowed after control
- Documents to present
- Code
- Y797
- Name
- Licensing system registration identification number as defined in Article 17.3 (a) of Regulation (EU) 2024/590
- Issued by
- It is the company's registration number in the European Commission licensing system for ozone-depleting substances. No letter is needed.
- Code
- L100
- Name
- Import licence "controlled substances" (ozone), issued by the Commission
- Issued by
- Issued by the European Commission. It is not a letter from the trader.
- Code
- Y798
- Name
- Declaration of net mass of ozone-depleting substance(s), when included in products and equipment
- Code
- Y799
- Name
- Net mass of the ozone-depleting substance multiplied by the ODP of the ozone-depleting substance(s), also when included in products and equipment
- If not affected, declare
- Code
- Y792
- Name
- Substances, products, equipment, other than those falling within the scope of Regulation (EU) 2024/590
- Template
- https://www.guiex.net/en/taric/templates#y792-mercancia-fuera-del-reglamento-de-sustancias-que-agotan
- Other codes
- Legal basis
- Regulation 2024/590
- From
- 2024-03-11
- Footnotes
- The placing on the market and import of ozone-depleting substances, products and equipment containing ozone-depleting substances listed in Annex I or whose functioning relies upon those substances shall be prohibited. (Articles 4 and 5 of regulation (EU) 2024/590) By virtue of Article 13 of Regulation (EU) 2024/590, the following imports are allowed: (a) ozone-depleting substances to be used as feedstock in accordance with Article 6; (b) ozone-depleting substances to be used as process agents in accordance with Article 7; (c) ozone-depleting substances to be used for essential laboratory and a…
- Each importer, undertaking or operator that imports ozone-depleting substances, products and equipment containing ozone-depleting substances listed in Annex I or whose functioning relies upon those substances shall provide to customs authorities the licensing system registration identification number and the number of the licence pursuant to Article 13(2) and Article 14(3).
- By virtue of Article 17.3 (c) and (d), when importing goods, the following information shall be declared: - net mass of ozone-depleting substance(s), also when included in products and equipment. - net mass multiplied by the ODP of the ozone-depleting substance(s), also when included in products and equipment.
Depends on the country
- Note
- Without a country, measures that depend on origin or destination are grouped. Give the country to see those that apply to a specific operation.
- Measures
- Measure
- Customs Union Duty
- Countries
- AD
- SM
- Türkiye
- Value
- 0 %
- Measure
- Tariff preference
- Countries
- AL
- AM
- Algeria
- BA
- CARIFORUM
- CI
- CM
- Canada
- Central America
- Chile
- Colombia
- EC
- EEA - European Economic Area
- EU-Canada agreement: re-imported goods
- Value
- 0 %
- More countries
- 43
- Measure
- Tariff preference
- Countries
- Mercosur
- Value
- 3 %
- Measure
- Restriction on entry into free circulation
- Countries
- IQ
- Syria
- Measure
- Import control on restricted goods and technologies
- Countries
- LY
- Russia
- Value
- Subject to conditions
- Measure
- Import control on luxury goods
- Countries
- North Korea
- Value
- Subject to conditions
- Measure
- Import control
- Countries
- Belarus
- LY
- Russia
- Ukraine
- Value
- Subject to conditions
National taxes
- VAT
- Rate (%)
- 21
- Name
- Standard
- Reason
- Standard rate: the goods are not among those at a reduced rate
- Legal basis
- Ley 37/1992, art. 90.Uno
- Equivalence surcharge
- Rate (%)
- 5.2
- When
- Only if the importer is a retailer under the equivalence surcharge scheme.
- Legal basis
- Ley 37/1992, art. 161
- Special tax on non-reusable plastic packaging
- Name
- Special tax on non-reusable plastic packaging
- Applies
- Possible
- Box 47 code
- 1PL
- Amount
- 0.45
- Unit
- EUR/kg
- Monthly exemption (kg)
- 5
- Explanation
- Only for any non-reusable plastic packaging in which the goods travel.
- Legal basis
- Ley 7/2022, art. 78
Explanations
- Title
- Low-value consignments
- Text
- A duty of 3 EUR per item on consignments with an intrinsic value of no more than 150 EUR sold at a distance to consumers. An item means the goods in the consignment with the same classification, description and origin. It is temporary, from 1 July 2026 to 1 July 2028, and is laid down in Regulation (EU) 2026/382.
- Title
- Union handling fee
- Text
- A fee of 2 EUR that is only charged if document Y126, goods sold at a distance, is declared. Without Y126 the measure does not apply.
- Title
- Proof of origin
- Text
- Paying the preferential duty requires a proof of origin accepted under the agreement with the country of origin, usually a certificate of origin or a statement on origin by the exporter. Without it the preference does not apply.
Binding tariff information
- This code
- Code
- 8708999727
- Total
- 0
- Valid today
- 0
- CN code (8 digits)
- Code
- 87089997
- Total
- 381
- Valid today
- 145
- HS subheading (6 digits)
- Code
- 870899
- Total
- 1714
- Valid today
- 383
Notes
- Type
- Legal note
- Title
- Sección XVII · MATERIAL DE TRANSPORTE
- Type
- Legal note
- Title
- Capítulo 87 · VEHÍCULOS AUTOMÓVILES, TRACTORES, VELOCÍPEDOS Y DEMÁS VEHÍCULOS TERRESTRES, SUS PARTES Y ACCESORIOS
- Type
- Explanatory note
- Title
- Consideraciones generales
- Type
- Explanatory note
- Title
- Partes y accesorios de vehículos automóviles de las partidas
- Type
- Legal note
- Title
- Sección XV · METALES COMUNES Y MANUFACTURAS DE ESTOS METALES
- Type
- Legal note
- Title
- Capítulo 83 · MANUFACTURAS DIVERSAS DE METAL COMÚN
- Type
- modificacion
- Title
- en la página 374, en la nota explicativa del capítulo 87, « Vehículos automóviles, tractor
Other lines at the same level
- 8708 99 97 22 Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film (declarable code)
- 8708 99 97 43 Outer tie rod with a housing made of AISI 4137 (SCM435) steel or EN10083/2- C45R N steel or JIS G4053-SCM435 low alloy steel, with: -a ball stud made of EN 10263/4 - 41CrS4 Q T steel or AISI 4137 (SCM435) steel or EN10083/3-42CrMoS4Q T steel or JIS G4053-SCM435 low alloy steel, -a polyoxymethylene plastic ball seat, -a distance between the end of the threaded hole and the centre of the ball stud of 124 mm or more but not more than 194 mm, -a ball stud diameter of 21,98 mm or more but no more than 22 mm, -a threaded hole depth of 40,5 mm or more but no more than 52 mm with dimensions M14x1,5, -a boot seal, -a boot seal protector and retaining ring, -lubricant, for use in the manufacture of vehicle's steering system (declarable code)
- 8708 99 97 50 Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: -internal porosity not more than 1 mm, -outer porosity not more than 2 mm, -rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles (declarable code)
- 8708 99 97 53 Roll rod assembly for the front suspension in vehicles for connecting the stabilizer to the suspension components: -made of aluminum, rubber, and plastic, -with a height of 270 mm or more, but not more than 300 mm, -with a width of 50 mm or more, but not more than 65 mm, -with a length of 150 mm or more, but not more than 170 mm, for use in the manufacture of motor vehicles (declarable code)
- 8708 99 97 58 Mounting bracket of front radiator or intercooler: -made of iron or steel or of plastics, -whether or not with rubber cushioning, for use in the manufacture of goods of heading 8708 (declarable code)
- 8708 99 97 75 Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87 (declarable code)
- 8708 99 97 80 Specific pre-assembled or ready-to assemble sections for new mobile cranes (declarable code)
- 8708 99 97 90 Other (declarable code)
Data as of 2026-11-13.