8708 94 99 90 · Other
Section XVII · VEHICLES, AIRCRAFT, VESSELS AND ASSOCIATED TRANSPORT EQUIPMENT
Sheet for the code
Full sheet on the GUIEX website
Operation
- Direction
- Import
- Date
- 2026-11-17
Duties
- Measure
- Third country duty
- Measure type
- 103
- Applies to
- All origins
- Value
- 3.5 %
- Legal basis
- Regulation No 1549/2006
- From
- 2007-01-01
- Measure
- Low-value consignment customs duty
- Measure type
- 107
- Applies to
- All origins
- Value
- 3.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C127
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Import is not allowed
- Condition
- Presentation of a certificate/licence/document
- Document
- C128
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- C129
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- Y081
- Outcome
- Apply the mentioned duty
- Documents to present
- Legal basis
- Regulation 2026/382
- From
- 2026-11-01
- Footnotes
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446. The merchant product identifier, the non-standardised manufacturer product identifier and, if it exists for t…
- Measure
- Union handling fee
- Measure type
- 800
- Applies to
- All origins
- Value
- 2.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- Y126
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- Y126
- Name
- Goods sold in distance sales
- Legal basis
- Regulation 2026/2108
- From
- 2026-11-01
- Footnotes
- Customs authorities shall collect a Union handling fee of a fixed amount per item for the services to be rendered for handling a request for placing goods under the release for free circulation procedure where those goods are sold in distance sales.
Restrictions and controls
- Measure
- Import control of fluorinated greenhouse gases
- Measure type
- 724
- Applies to
- All origins
- Value
- Subject to conditions
- Conditions
- Condition
- Other conditions
- Document
- Y152
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y986
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y160
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y169
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Outcome
- Import/export not allowed after control
- Condition
- Other conditions
- Document
- Y123
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y054
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y163
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y121
- Outcome
- Import/export allowed after control
- Documents to present
- Code
- Y121
- Name
- Tonnes of CO₂ equivalent of bulk gases and of gases contained in products or equipment, and parts thereof
- Template
- https://www.guiex.net/en/taric/templates#registro-en-el-f-gas-portal-y-codigos-de-la-declaracion
- Code
- Y123
- Name
- Undertaking registered in the F-Gas Portal according to Article 20 of Regulation (EU) 2024/573
- Issued by
- It is the company's own registration in the European Commission's fluorinated gas portal. No letter is needed.
- Code
- Y163
- Name
- Net mass of fluorinated greenhouse gases charged in products and equipment
- Code
- Y054
- Name
- Goods labelled according to the provisions of Article 12 of Regulation (EU) 2024/573
- Template
- https://www.guiex.net/en/taric/templates#registro-en-el-f-gas-portal-y-codigos-de-la-declaracion
- If not affected, declare
- Code
- Y160
- Name
- Goods other than those falling under the applicable provisions of Regulation (EU) 2024/573
- Template
- https://www.guiex.net/en/taric/templates#y160-mercancia-no-sujeta-al-reglamento-de-gases-fluorados
- Code
- Y152
- Name
- Exemption from import prohibition, granted for repair or servicing of existing equipment, according to the second paragraph of Article 11.1 of Regulation (EU) 2024/573
- Template
- https://www.guiex.net/en/taric/templates#y152-importacion-para-reparacion-o-revision-de-aparatos
- Code
- Y169
- Name
- Products and equipment, including parts (excluding military and repair exemption) listed in Annex IV containing F-gases or relies upon F-gases not subject to prohibition as imposed by Article 11.1. (Reg 2024/573).
- Template
- https://www.guiex.net/en/taric/templates#y169-aparatos-con-gases-fluorados-no-prohibidos
- Other codes
- Legal basis
- Regulation 2024/573
- From
- 2025-06-25
- Footnotes
- By virtue of Article 4(6) of Regulation (EU) 2024/573, the placing on the market of fluorinated greenhouse gases shall be prohibited, unless importers provide evidence that any trifluoromethane, produced as a by-product during the production process of the fluorinated greenhouse gases has been destroyed or recovered for subsequent use, using best available techniques. By virtue of Article 11.1. of Regulation (EU) 2024/573, the placing on the market of products and equipment, including parts thereof, listed in Annex IV, with an exemption for military equipment, shall be prohibited from the date…
- Measure
- Import control on ozone-depleting substances
- Measure type
- 726
- Applies to
- All origins
- Value
- Subject to conditions
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- L100
- Outcome
- Entry into free circulation allowed
- Condition
- Presentation of a certificate/licence/document
- Document
- Y792
- Outcome
- Entry into free circulation allowed
- Condition
- Presentation of a certificate/licence/document
- Outcome
- The entry into free circulation is not allowed
- Condition
- Other conditions
- Document
- Y791
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y789
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y790
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y792
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Outcome
- Import/export not allowed after control
- Condition
- Other conditions
- Document
- Y797
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y798
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y799
- Outcome
- Import/export allowed after control
- Documents to present
- Code
- Y797
- Name
- Licensing system registration identification number as defined in Article 17.3 (a) of Regulation (EU) 2024/590
- Issued by
- It is the company's registration number in the European Commission licensing system for ozone-depleting substances. No letter is needed.
- Code
- L100
- Name
- Import licence "controlled substances" (ozone), issued by the Commission
- Issued by
- Issued by the European Commission. It is not a letter from the trader.
- Code
- Y798
- Name
- Declaration of net mass of ozone-depleting substance(s), when included in products and equipment
- Code
- Y799
- Name
- Net mass of the ozone-depleting substance multiplied by the ODP of the ozone-depleting substance(s), also when included in products and equipment
- If not affected, declare
- Code
- Y792
- Name
- Substances, products, equipment, other than those falling within the scope of Regulation (EU) 2024/590
- Template
- https://www.guiex.net/en/taric/templates#y792-mercancia-fuera-del-reglamento-de-sustancias-que-agotan
- Other codes
- Legal basis
- Regulation 2024/590
- From
- 2024-03-11
- Footnotes
- The placing on the market and import of ozone-depleting substances, products and equipment containing ozone-depleting substances listed in Annex I or whose functioning relies upon those substances shall be prohibited. (Articles 4 and 5 of regulation (EU) 2024/590) By virtue of Article 13 of Regulation (EU) 2024/590, the following imports are allowed: (a) ozone-depleting substances to be used as feedstock in accordance with Article 6; (b) ozone-depleting substances to be used as process agents in accordance with Article 7; (c) ozone-depleting substances to be used for essential laboratory and a…
- Each importer, undertaking or operator that imports ozone-depleting substances, products and equipment containing ozone-depleting substances listed in Annex I or whose functioning relies upon those substances shall provide to customs authorities the licensing system registration identification number and the number of the licence pursuant to Article 13(2) and Article 14(3).
- By virtue of Article 17.3 (c) and (d), when importing goods, the following information shall be declared: - net mass of ozone-depleting substance(s), also when included in products and equipment. - net mass multiplied by the ODP of the ozone-depleting substance(s), also when included in products and equipment.
Depends on the country
- Note
- Without a country, measures that depend on origin or destination are grouped. Give the country to see those that apply to a specific operation.
- Measures
- Measure
- Customs Union Duty
- Countries
- AD
- SM
- Türkiye
- Value
- 0 %
- Measure
- Tariff preference
- Countries
- AL
- AM
- Algeria
- BA
- CARIFORUM
- CI
- CM
- Canada
- Central America
- Chile
- Colombia
- EC
- EEA - European Economic Area
- EU-Canada agreement: re-imported goods
- Value
- 0 %
- More countries
- 43
- Measure
- Tariff preference
- Countries
- Mercosur
- Value
- 3 %
- Measure
- Restriction on entry into free circulation
- Countries
- IQ
- Syria
- Measure
- Import control on restricted goods and technologies
- Countries
- LY
- Russia
- Value
- Subject to conditions
- Measure
- Import control on luxury goods
- Countries
- North Korea
- Value
- Subject to conditions
- Measure
- Import control
- Countries
- Belarus
- LY
- Russia
- Ukraine
- Value
- Subject to conditions
National taxes
- VAT
- Rate (%)
- 21
- Name
- Standard
- Reason
- Standard rate: the goods are not among those at a reduced rate
- Legal basis
- Ley 37/1992, art. 90.Uno
- Equivalence surcharge
- Rate (%)
- 5.2
- When
- Only if the importer is a retailer under the equivalence surcharge scheme.
- Legal basis
- Ley 37/1992, art. 161
- Special tax on non-reusable plastic packaging
- Name
- Special tax on non-reusable plastic packaging
- Applies
- Possible
- Box 47 code
- 1PL
- Amount
- 0.45
- Unit
- EUR/kg
- Monthly exemption (kg)
- 5
- Explanation
- Only for any non-reusable plastic packaging in which the goods travel.
- Legal basis
- Ley 7/2022, art. 78
Explanations
- Title
- Low-value consignments
- Text
- A duty of 3 EUR per item on consignments with an intrinsic value of no more than 150 EUR sold at a distance to consumers. An item means the goods in the consignment with the same classification, description and origin. It is temporary, from 1 July 2026 to 1 July 2028, and is laid down in Regulation (EU) 2026/382.
- Title
- Union handling fee
- Text
- A fee of 2 EUR that is only charged if document Y126, goods sold at a distance, is declared. Without Y126 the measure does not apply.
- Title
- Proof of origin
- Text
- Paying the preferential duty requires a proof of origin accepted under the agreement with the country of origin, usually a certificate of origin or a statement on origin by the exporter. Without it the preference does not apply.
Binding tariff information
- This code
- Code
- 8708949990
- Total
- 1
- Valid today
- 1
- CN code (8 digits)
- Code
- 87089499
- Total
- 116
- Valid today
- 6
- HS subheading (6 digits)
- Code
- 870894
- Total
- 176
- Valid today
- 22
Notes
- Type
- Legal note
- Title
- Sección XVII · MATERIAL DE TRANSPORTE
- Type
- Legal note
- Title
- Capítulo 87 · VEHÍCULOS AUTOMÓVILES, TRACTORES, VELOCÍPEDOS Y DEMÁS VEHÍCULOS TERRESTRES, SUS PARTES Y ACCESORIOS
- Type
- Explanatory note
- Title
- Consideraciones generales
- Type
- Explanatory note
- Title
- Partes y accesorios de vehículos automóviles de las partidas
- Type
- Legal note
- Title
- Sección XV · METALES COMUNES Y MANUFACTURAS DE ESTOS METALES
- Type
- Legal note
- Title
- Capítulo 83 · MANUFACTURAS DIVERSAS DE METAL COMÚN
- Type
- modificacion
- Title
- en la página 374, en la nota explicativa del capítulo 87, « Vehículos automóviles, tractor
Other lines at the same level
- 8708 94 99 10 Hub gear made of cold rolled carbon steel (per ASTM A1008), molded into the plastic and pressed on pinion, with: -an outer diameter of 81,2 mm or more, but not more than 82,55 mm, -an inner diameter of 25,9 mm or more, but not more than 25,97 mm, -a height of the lower side of inner diameter of 11,63 mm or more, but not more than 12,13 mm, -a height of the upper side of inner diameter of 3,25 mm or more, but not more than 3,5 mm, -an overall height of 11,63 mm or more, but not more than 19,5 mm for use in the manufacture of vehicle's steering system (declarable code)
- 8708 94 99 20 Intermediate steering shaft forming part of the steering column with: -a torsional rigidity of 25 Nm/degree or more, -a tubular male shaft in welded carbon steel tube (per GB/T 699 grade 20), -a tubular female shaft in welded carbon steel tube (per with GB/T 699 grade 20), -two spiders universal joint made of chromium alloy steel (per GB/T 5216 grade 20CrMnTiH), -a length in nominal telescope position of 396 mm or more but not more than 467 mm, -a coupling interface on both ends with internal toothing, -two cardan joints on both sides, -a telescope shaft function with a range of 74 mm or more but not more than 115 mm, for use in the manufacture of vehicle's steering system (declarable code)
- 8708 94 99 30 Lower assist shaft as part of the steering column made of carbon steel (per GB/T699 grade 45 or JIS G4051 grade S45C) with: -an ultimate torsional strength load of 325 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, -a length of 66,39 mm or more but not more than 88,64 mm, -an outer diameter of 27,47 mm or more but not more than 28,38 mm, -an inner hole of diameter 6,50 mm or more but not more than 6,58 mm, -an external 26-teeth spline with major diameter 21,18 mm or more but not more than 21,44 mm, -a knurling on a part of outer surface of major diameter 26,0 mm or more but not more than 26,1 mm, -with or without an external 24-tooth spline and with a major diameter 24,75 mm or more but not more than 25 mm, for use in the manufacture of vehicle's steering system (declarable code)
- 8708 94 99 40 Upper assist shaft as part of the steering column made of carbon steel (per GB/T699 grade 45) with: -an ultimate torsional strength load of 325 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, -a length of 165,3 mm or more but not more than 204,2 mm, -an outer diameter of 22,87 mm or more but not more than 22,92 mm, -an internal hole of diameter 6,50 or more but not more than 6,58 mm, -an external spline, for use in the manufacture of vehicle's steering system (declarable code)
- 8708 94 99 50 Lower shaft as part of the steering column made of aluminium alloy (per ASTM B221M grade 6105), air quenched and tempered with: -an ultimate torsional strength of 260 Nm or more, -a length of 296,7 mm or more but not more than 297,8 mm, -an external 18-tooth spline on all shaft length with major diameter of 28,7 mm or more but not more than 29 mm, -an 18-tooth internal spline with a minor diameter of 19,7 mm or more but not more than 20 mm, for use in the manufacture of vehicle's steering system (declarable code)
- 8708 94 99 60 Torsion bar as part of the steering column made of carbon alloy steel (per SAE J1268, grade 5160H of modified chemistry for carbon content of 0,53 or more, but not more than 0,56) with: -a shaft torsional stiffness of 2,5 Nm/degree or more but not more than 2,7 Nm/degree, -a length of 107,75 mm or more but not more than 108,25 mm, -an outer diameter of 6,38 mm or more but not more than 6,42 mm, -two external 18-tooth splines on both shaft ends with a major diameter of 6,70 mm or more but not more than 6,85 mm, as interface to pressing with matting input and output shafts, -entire surface shot peened, for use in the manufacture of vehicle's steering system (declarable code)
- 8708 94 99 70 Tubular steering shaft as part of the steering column made of carbon steel welded tube (per EN 10305/2, E235 C or GB/T699 grade 20) with: -an ultimate torsional strength of 300 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, -a length of 245,48 mm or more but not more than 287,5 mm, -an outer diameter of 23,95 mm or more but not more than 32,25 mm, -an interface for steering wheel connection either in a form of an external 40-tooth spline with major diameter of 17,1 mm or more but not more than 17,5 mm and an internal thread M12x1,75-6H or in a form of an external hexagon with a short diagonal of 15,05 mm or more but not more than 15,35mm and an internal thread M10x1.5-6H, -an interface either in a form of an internal 10-tooth spline of length of 98.0 mm or more but not more than 160 mm, with minor diameter of 16,1 mm or more but not more than 16,4 mm or in a form of an internal 48-tooth spline of length of 151 mm or more but not more than 160 mm, with minor diameter of 23,2 mm or more but not more than 23,3 mm, for use in the manufacture of vehicle's steering system (declarable code)
- 8708 94 99 80 Blank assembly worm gear, consisting of a hub of carbon steel (GB/T 699 grade 25 or DIN EN 10277 grade 11SMn30) and a ring of cast polyamide 6/12 with: - an outer diameter of 97,35 mm or more, but not more than 102,65 mm, - an inner diameter of 27,91 mm or more, but not more than 27,93 mm, - a height of the hub of 11,75 mm or more, but not more than 12,00 mm, - an overall height of 16,00 mm or more, but not more than 18,00 mm (declarable code)
Data as of 2026-11-13.