8505 11 10 76 · Articles of an alloy of neodymium, or an alloy of samarium, - whether or not coated or passivated with a surface treatment, - whether or not covered with zinc, - in the shape of rectangles, with: - a length of 13,8 mm or more but not more than 45,2 mm, - a width of 7,8 mm or more but not more than 25,2 mm, - a height of 1,3 mm or more but not more than 4,7 mm, intended to become permanent magnets after magnetisation
Section XVI · MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
Sheet for the code
Full sheet on the GUIEX website
Operation
- Direction
- Import
- Date
- 2026-11-17
Duties
- Measure
- Third country duty
- Measure type
- 103
- Applies to
- All origins
- Value
- 2.2 %
- Legal basis
- Regulation No 2261/98
- From
- 1999-01-01
- Measure
- Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms
- Measure type
- 117
- Applies to
- All origins
- Value
- 0 %
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C990
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- C990
- Name
- End use authorisation ships and platforms (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Issued by
- Issued by the customs authority. It is not a letter from the trader.
- Legal basis
- Regulation No 2658/87
- From
- 2024-07-01
- Until
- 2026-12-31
- Footnotes
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 22 10, 8903 23 10, 8903 32 10, 8903 33 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in…
- Measure
- Airworthiness tariff suspension
- Measure type
- 119
- Applies to
- All origins
- Value
- 0 %
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C119
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- C119
- Name
- Authorised Release Certificate — EASA Form 1 (Appendix I to Annex I to Regulation (EU) No 748/2012), or equivalent certificate
- Issued by
- Signed by the approved production or maintenance organisation that made or serviced the part.
- Legal basis
- Regulation 2018/1517
- From
- 2018-11-01
- Footnotes
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to…
- Measure
- Non preferential tariff quota
- Measure type
- 122
- Applies to
- All origins
- Value
- 0 %
- Quota order number
- 09.2555
- Except
- Belarus
- Russia
- Legal basis
- Regulation 2025/2614
- From
- 2026-01-01
- Until
- 2026-12-31
- Footnotes
- The tariff quota does not apply to any mixtures, preparations or products made up of different components containing products which are listed in the Annex to Council Regulation (EU) 2021/2283.
- Measure
- Low-value consignment customs duty
- Measure type
- 107
- Applies to
- All origins
- Value
- 3.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C127
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Import is not allowed
- Condition
- Presentation of a certificate/licence/document
- Document
- C128
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- C129
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- Y081
- Outcome
- Apply the mentioned duty
- Documents to present
- Legal basis
- Regulation 2026/382
- From
- 2026-11-01
- Footnotes
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446. The merchant product identifier, the non-standardised manufacturer product identifier and, if it exists for t…
- Measure
- Union handling fee
- Measure type
- 800
- Applies to
- All origins
- Value
- 2.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- Y126
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- Y126
- Name
- Goods sold in distance sales
- Legal basis
- Regulation 2026/2108
- From
- 2026-11-01
- Footnotes
- Customs authorities shall collect a Union handling fee of a fixed amount per item for the services to be rendered for handling a request for placing goods under the release for free circulation procedure where those goods are sold in distance sales.
Restrictions and controls
- Measure
- Import control
- Measure type
- 714
- Applies to
- All origins
- Value
- Subject to conditions
- Conditions
- Condition
- Other conditions
- Document
- Y949
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- C067
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y069
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Outcome
- Import/export not allowed after control
- Documents to present
- Code
- C067
- Name
- Import authorisation for restricted goods and technologies (Council Regulation (EU) No 267/2012)
- Issued by
- In Spain it is granted by the Secretariat of State for Trade. It is not a letter from the trader.
- If not affected, declare
- Except
- Iran
- Legal basis
- Regulation No 267/2012
- From
- 2017-04-03
- Footnotes
- If the goods declared are described in footnote "DU" linked to the measure a prior import authorisation must be presented for the import, purchase or transport from Iran of the goods and technology listed in Annex I, whether or not originating in Iran (R267/2012).
- Goods 0B001j from the dual use list.
Depends on the country
- Note
- Without a country, measures that depend on origin or destination are grouped. Give the country to see those that apply to a specific operation.
- Measures
- Measure
- Customs Union Duty
- Countries
- AD
- SM
- Türkiye
- Value
- 0 %
- Measure
- Tariff preference
- Countries
- AL
- AM
- Algeria
- BA
- CARIFORUM
- CI
- CM
- Canada
- Central America
- Chile
- Colombia
- EC
- EEA - European Economic Area
- EU-Canada agreement: re-imported goods
- Value
- 0 %
- More countries
- 44
- Measure
- Import prohibition
- Countries
- North Korea
- Value
- Prohibited
- Measure
- Import control
- Countries
- Iran
- North Korea
- Ukraine
- Value
- Subject to conditions
- Measure
- Import control on restricted goods and technologies
- Countries
- North Korea
- Value
- Subject to conditions
National taxes
- VAT
- Rate (%)
- 21
- Name
- Standard
- Reason
- Standard rate: the goods are not among those at a reduced rate
- Legal basis
- Ley 37/1992, art. 90.Uno
- Equivalence surcharge
- Rate (%)
- 5.2
- When
- Only if the importer is a retailer under the equivalence surcharge scheme.
- Legal basis
- Ley 37/1992, art. 161
- Special tax on non-reusable plastic packaging
- Name
- Special tax on non-reusable plastic packaging
- Applies
- Possible
- Box 47 code
- 1PL
- Amount
- 0.45
- Unit
- EUR/kg
- Monthly exemption (kg)
- 5
- Explanation
- Only for any non-reusable plastic packaging in which the goods travel.
- Legal basis
- Ley 7/2022, art. 78
Explanations
- Title
- Low-value consignments
- Text
- A duty of 3 EUR per item on consignments with an intrinsic value of no more than 150 EUR sold at a distance to consumers. An item means the goods in the consignment with the same classification, description and origin. It is temporary, from 1 July 2026 to 1 July 2028, and is laid down in Regulation (EU) 2026/382.
- Title
- Union handling fee
- Text
- A fee of 2 EUR that is only charged if document Y126, goods sold at a distance, is declared. Without Y126 the measure does not apply.
- Title
- Proof of origin
- Text
- Paying the preferential duty requires a proof of origin accepted under the agreement with the country of origin, usually a certificate of origin or a statement on origin by the exporter. Without it the preference does not apply.
Warnings
- The reduced rate only applies while quota 09.2555 has a balance left. The Commission publishes the balance.
Binding tariff information
- This code
- Code
- 8505111076
- Total
- 1
- Valid today
- 0
- CN code (8 digits)
- Code
- 85051110
- Total
- 52
- Valid today
- 1
- HS subheading (6 digits)
- Code
- 850511
- Total
- 962
- Valid today
- 6
Notes
- Type
- Legal note
- Title
- Sección XVI · MÁQUINAS Y APARATOS, MATERIAL ELÉCTRICO Y SUS PARTES; APARATOS DE GRABACIÓN O REPRODUCCIÓN DE SONIDO, APARATOS DE GRABACIÓN O REPRODUCCIÓN DE IMÁGENES Y SONIDO EN TELEVISIÓN, Y LAS PARTES Y ACCESORIOS DE ESTOS APARATOS
- Type
- Legal note
- Title
- Capítulo 85 · MÁQUINAS, APARATOS Y MATERIAL ELÉCTRICO, Y SUS PARTES; APARATOS DE GRABACIÓN O REPRODUCCIÓN DE SONIDO, APARATOS DE GRABACIÓN O REPRODUCCIÓN DE IMAGEN Y SONIDO EN TELEVISIÓN, Y LAS PARTES Y ACCESORIOS DE ESTOS APARATOS
- Type
- Explanatory note
- Title
- Consideraciones generales
- Type
- Legal note
- Title
- Sección XV · METALES COMUNES Y MANUFACTURAS DE ESTOS METALES
- Type
- Legal note
- Title
- Capítulo 38 · PRODUCTOS DIVERSOS DE LAS INDUSTRIAS QUÍMICAS
- Type
- Legal note
- Title
- Capítulo 83 · MANUFACTURAS DIVERSAS DE METAL COMÚN
- Type
- modificacion
- Title
- 8505 11 00 a 8505 19 90 Imanes permanentes y artículos destinados a ser imantados permanentemente
Other lines at the same level
- 8505 11 10 20 Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid, -whether or not arched, -whether or not with rounded corners or oblique sides, -whether or not colour marked -whether or not coated or passivated with a surface treatment, -whether or not consisting of segments bonded together and electrically insulated from one another with: -a length of 9 mm or more, but not more than 105 mm, -a width of 5 mm or more, but not more than 105 mm, -a thickness of 2 mm or more, but not more than 55 mm intended to become permanent magnet after magnetisation (declarable code)
- 8505 11 10 23 Bars in the form of arched rectangles, containing alloy containing neodymium, with: -a length of 15 mm or more but not more than 52 mm, -a width of 5 mm or more but not more than 42 mm, -whether or not coated or passivated with a surface treatment, intended to become permanent magnets after magnetisation (declarable code)
- 8505 11 10 28 Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars: -with an external diameter of not more than 45 mm, -with a height of not more than 45 mm, -whether or not coated or passivated with a surface treatment, intended to become permanent magnets after magnetisation (declarable code)
- 8505 11 10 30 Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with: -a rectangular or a trapezoidal cross-section, -a length of not more than 140 mm, -a width of not more than 90 mm and -a thickness of not more than 55 mm, or in the shape of an arched rectangle with: -a length of not more than 75 mm, -a width of not more than 40 mm, -a thickness of not more than 7 mm and -a radius of curvature of more than 86 mm but not more than 241 mm, -layers of nickel and copper or in the shape of a disc with: -a diameter of not more than 90 mm, -whether or not a hole in the centre (declarable code)
- 8505 11 10 35 Article of an alloy of neodymium, in the shape of a disc, with: -a diameter of not more than 90 mm, -whether or not a hole in the centre, -layers of copper, nickel and/or zinc, intended to become permanent magnets after magnetisation (declarable code)
- 8505 11 10 74 Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, - whether or not overmolded with polymers, - whether or not coated or passivated with a surface treatment, with: - a length of 5 mm or more, but not more than 60 mm, - a width of 5 mm or more, but not more than 40 mm, - a thickness of 3 mm or more, but not more than 15 mm, intended to become permanent magnets after magnetisation (declarable code)
- 8505 11 10 75 A quarter sleeve intended to become permanent magnet after magnetization, - consisting of at least neodymium, iron and boron, - with a width of 9,1 mm or more but not more than 10,5 mm, - with a length of 20 mm or more but not more than 30,1 mm, of a kind used on rotors for the manufacture of fuel pumps (declarable code)
- 8505 11 10 77 Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with: - a width of 9,1 mm or more but not more than 10,5 mm, - a length of 20 mm or more but not more than 30,1 mm, intended to become permanent magnets after magnetization (declarable code)
- 8505 11 10 78 Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions: -a length of 200 mm or more but not more than 205 mm, -a width of 58 mm or more but not more than 62 mm, -a height of 25 mm or more but not more than 30 mm, with a stud mounted in the middle (declarable code)
- 8505 11 10 99 Other (declarable code)
Data as of 2026-11-13.