8481 80 59 00 · Other
Section XVI · MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
Lines at this level
- 8481 80 59 20 Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (declarable code)
- 8481 80 59 30 Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 MPa operating pressure (declarable code)
- 8481 80 59 40 Flow-control valve - made of steel, - with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5 mm, - with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm, - with chromium nitride coating, - with a surface roughness of Rp 0,4 (declarable code)
- 8481 80 59 50 Electromagnetic valve for quantity control with - a plunger, - a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm (declarable code)
- 8481 80 59 60 Electromagnetic valve for quantity control - with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH (declarable code)
- 8481 80 59 70 Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm (declarable code)
- 8481 80 59 80 Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: -with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector, -with an operating pressure of not more than 5.5 bar, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a valve's base width of 22 mm or more but not more than 27 mm, -with a valve's length of 55 mm or more but not more than 110 mm, for use in the manufacture of motor vehicle engines (declarable code)
- 8481 80 59 90 Other (declarable code)
Data as of 2026-11-13.