8409 91 00 83 · Connecting rod for connecting pistons to the crankshaft of a passenger car engine: • made of an alloy containing 96 % steel and the remainder being titanium, vanadium, aluminium, chromium, nickel, copper, phosphorus, silicon, sulphur, manganese, • with two connecting rod bolts, • with a bushing, • of a length of 120 mm or more but not more than 160 mm, • with a surface roughness corresponding to ISO 4287-1997, for use in the manufacture of spark ignition motor vehicle engines
Section XVI · MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
Sheet for the code
Full sheet on the GUIEX website
Operation
- Direction
- Import
- Date
- 2026-11-17
Duties
- Measure
- Third country duty
- Measure type
- 103
- Applies to
- All origins
- Value
- 2.7 %
- Legal basis
- Regulation No 2261/98
- From
- 1999-01-01
- Measure
- Airworthiness tariff suspension
- Measure type
- 119
- Applies to
- All origins
- Value
- 0 %
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C119
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- C119
- Name
- Authorised Release Certificate — EASA Form 1 (Appendix I to Annex I to Regulation (EU) No 748/2012), or equivalent certificate
- Issued by
- Signed by the approved production or maintenance organisation that made or serviced the part.
- Legal basis
- Regulation 2018/1517
- From
- 2018-11-01
- Footnotes
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to…
- Measure
- Non preferential tariff quota under end-use
- Measure type
- 123
- Applies to
- All origins
- Value
- 0 %
- Quota order number
- 09.2035
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- N990
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Declared subheading not allowed
- Documents to present
- Code
- N990
- Name
- EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Issued by
- Granted by the customs authority. It is not a letter from the trader.
- Except
- Belarus
- Russia
- Legal basis
- Regulation 2025/2614
- From
- 2026-01-01
- Until
- 2026-12-31
- Footnotes
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- The tariff quota does not apply to any mixtures, preparations or products made up of different components containing products which are listed in the Annex to Council Regulation (EU) 2021/2283.
- Measure
- Low-value consignment customs duty
- Measure type
- 107
- Applies to
- All origins
- Value
- 3.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C127
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Import is not allowed
- Condition
- Presentation of a certificate/licence/document
- Document
- C128
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- C129
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- Y081
- Outcome
- Apply the mentioned duty
- Documents to present
- Legal basis
- Regulation 2026/382
- From
- 2026-11-01
- Footnotes
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446. The merchant product identifier, the non-standardised manufacturer product identifier and, if it exists for t…
- Measure
- Union handling fee
- Measure type
- 800
- Applies to
- All origins
- Value
- 2.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- Y126
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- Y126
- Name
- Goods sold in distance sales
- Legal basis
- Regulation 2026/2108
- From
- 2026-11-01
- Footnotes
- Customs authorities shall collect a Union handling fee of a fixed amount per item for the services to be rendered for handling a request for placing goods under the release for free circulation procedure where those goods are sold in distance sales.
Supplementary units
- NAR
Depends on the country
- Note
- Without a country, measures that depend on origin or destination are grouped. Give the country to see those that apply to a specific operation.
- Measures
- Measure
- Customs Union Duty
- Countries
- AD
- SM
- Türkiye
- Value
- 0 %
- Measure
- Tariff preference
- Countries
- AL
- AM
- Algeria
- BA
- CARIFORUM
- CI
- CM
- Canada
- Central America
- Chile
- Colombia
- EC
- EEA - European Economic Area
- EU-Canada agreement: re-imported goods
- Value
- 0 %
- More countries
- 44
- Measure
- Import prohibition
- Countries
- North Korea
- Value
- Prohibited
- Measure
- Import control on luxury goods
- Countries
- North Korea
- Value
- Subject to conditions
- Measure
- Import control
- Countries
- Belarus
- Russia
- Ukraine
- Value
- Subject to conditions
National taxes
- VAT
- Rate (%)
- 21
- Name
- Standard
- Reason
- Standard rate: the goods are not among those at a reduced rate
- Legal basis
- Ley 37/1992, art. 90.Uno
- Equivalence surcharge
- Rate (%)
- 5.2
- When
- Only if the importer is a retailer under the equivalence surcharge scheme.
- Legal basis
- Ley 37/1992, art. 161
- Special tax on non-reusable plastic packaging
- Name
- Special tax on non-reusable plastic packaging
- Applies
- Possible
- Box 47 code
- 1PL
- Amount
- 0.45
- Unit
- EUR/kg
- Monthly exemption (kg)
- 5
- Explanation
- Only for any non-reusable plastic packaging in which the goods travel.
- Legal basis
- Ley 7/2022, art. 78
National controls
- Control
- Defence material control
- Authority
- Sub-Directorate General for International Trade in Defence Material and Dual-Use Items
- Certainty
- May apply if the goods fall within the scope of this control. The national tariff places it on the whole code and it could not be checked against the rules which goods it covers.
- Documents to present
- Legal basis
- Royal Decree 679/2014
Explanations
- Title
- Low-value consignments
- Text
- A duty of 3 EUR per item on consignments with an intrinsic value of no more than 150 EUR sold at a distance to consumers. An item means the goods in the consignment with the same classification, description and origin. It is temporary, from 1 July 2026 to 1 July 2028, and is laid down in Regulation (EU) 2026/382.
- Title
- Union handling fee
- Text
- A fee of 2 EUR that is only charged if document Y126, goods sold at a distance, is declared. Without Y126 the measure does not apply.
- Title
- Proof of origin
- Text
- Paying the preferential duty requires a proof of origin accepted under the agreement with the country of origin, usually a certificate of origin or a statement on origin by the exporter. Without it the preference does not apply.
Warnings
- The reduced rate only applies while quota 09.2035 has a balance left. The Commission publishes the balance.
Binding tariff information
- This code
- Code
- 8409910083
- Total
- 0
- Valid today
- 0
- CN code (8 digits)
- Code
- 84099100
- Total
- 235
- Valid today
- 30
- HS subheading (6 digits)
- Code
- 840991
- Total
- 417
- Valid today
- 72
Notes
- Type
- Legal note
- Title
- Sección XVI · MÁQUINAS Y APARATOS, MATERIAL ELÉCTRICO Y SUS PARTES; APARATOS DE GRABACIÓN O REPRODUCCIÓN DE SONIDO, APARATOS DE GRABACIÓN O REPRODUCCIÓN DE IMÁGENES Y SONIDO EN TELEVISIÓN, Y LAS PARTES Y ACCESORIOS DE ESTOS APARATOS
- Type
- Legal note
- Title
- Capítulo 84 · REACTORES NUCLEARES, CALDERAS, MÁQUINAS, APARATOS Y ARTEFACTOS MECÁNICOS; PARTES DE ESTAS MÁQUINAS O APARATOS
- Type
- Explanatory note
- Title
- Consideraciones generales
- Type
- Explanatory note
- Title
- Partes identificables como destinadas, exclusiva o principalmente, a los motores de las partidas
- Type
- Legal note
- Title
- Sección XV · METALES COMUNES Y MANUFACTURAS DE ESTOS METALES
- Type
- Legal note
- Title
- Capítulo 38 · PRODUCTOS DIVERSOS DE LAS INDUSTRIAS QUÍMICAS
- Type
- Legal note
- Title
- Capítulo 83 · MANUFACTURAS DIVERSAS DE METAL COMÚN
Other lines at the same level
- 8409 91 00 28 Carburetor with : -2 mounting holes with a diameter of 31 mm, -a choke bore diameter of 18 mm or more, but not more than 19,05 mm for use in the manufacture of a two-stroke engine grass trimmer (declarable code)
- 8409 91 00 33 Camshaft carrier for a spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, with: -a weight of 4,0 kg or more but not more than 5,5 kg, -a wall thickness of 2,0 mm or more but not more than 6,0 mm, for use in the manufacture of motor vehicle engines (declarable code)
- 8409 91 00 35 Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with: -an operating pressure of not more than 22,5 MPa, -solenoid direct injector, -analog pressure sensor for not more than 22,5 MPa (declarable code)
- 8409 91 00 38 Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, for use in the manufacture of motor vehicle engines (declarable code)
- 8409 91 00 40 Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles (declarable code)
- 8409 91 00 45 Metal alloy intake and exhaust valve, with a Rockwell hardness HRC 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles (declarable code)
- 8409 91 00 50 Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm (declarable code)
- 8409 91 00 55 Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute (declarable code)
- 8409 91 00 63 Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy EN AC-45500, with: - no other components, - a hardness of 90HB or more, - casting defects size of not more than 0,4 mm and not more than 10 defects per cm², - a dendrite arm space in combustion chamber of not more than 25 μm, - a double deck water jacket design, - a weight of 14 kg or more but not more than 19 kg, - a length of 460 mm or more but not more than 510 mm, - a height of 260 mm or more but not more than 286 mm and - a width of 140 mm or more but not more than 150 mm (declarable code)
- 8409 91 00 75 Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with: -an inlet diameter of 2 mm or more, but not more than 10 mm, -an outlet diameter of 2 mm or more, but not more than 10 mm, -an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection, -a plastic covering moulded around a stainless steel tube (declarable code)
- 8409 91 00 80 Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating (declarable code)
- 8409 91 00 90 Other (declarable code)
Data as of 2026-11-13.