7609 00 00 10 · For use in certain types of aircraft
Section XV · BASE METALS AND ARTICLES OF BASE METAL
Sheet for the code
Full sheet on the GUIEX website
Operation
- Direction
- Import
- Date
- 2026-11-17
Duties
- Measure
- Third country duty
- Measure type
- 103
- Applies to
- All origins
- Value
- 5.9 %
- Legal basis
- Regulation No 711/2006
- From
- 2006-05-12
- Measure
- Autonomous suspension under end-use
- Measure type
- 115
- Applies to
- All origins
- Value
- 0 %
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- N990
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Declared subheading not allowed
- Documents to present
- Code
- N990
- Name
- EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Issued by
- Granted by the customs authority. It is not a letter from the trader.
- Legal basis
- Regulation No 3050/95
- From
- 2007-01-01
- Footnotes
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- For the construction, maintenance and repair of aircraft of an unladen weight exceeding 2 000 kilograms and of ground flying trainers for civil use.
- Measure
- Airworthiness tariff suspension
- Measure type
- 119
- Applies to
- All origins
- Value
- 0 %
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C119
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- C119
- Name
- Authorised Release Certificate — EASA Form 1 (Appendix I to Annex I to Regulation (EU) No 748/2012), or equivalent certificate
- Issued by
- Signed by the approved production or maintenance organisation that made or serviced the part.
- Legal basis
- Regulation 2018/1517
- From
- 2018-11-01
- Footnotes
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to…
- Measure
- Low-value consignment customs duty
- Measure type
- 107
- Applies to
- All origins
- Value
- 3.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C127
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Import is not allowed
- Condition
- Presentation of a certificate/licence/document
- Document
- C128
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- C129
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- Y081
- Outcome
- Apply the mentioned duty
- Documents to present
- Legal basis
- Regulation 2026/382
- From
- 2026-11-01
- Footnotes
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446. The merchant product identifier, the non-standardised manufacturer product identifier and, if it exists for t…
- Measure
- Union handling fee
- Measure type
- 800
- Applies to
- All origins
- Value
- 2.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- Y126
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- Y126
- Name
- Goods sold in distance sales
- Legal basis
- Regulation 2026/2108
- From
- 2026-11-01
- Footnotes
- Customs authorities shall collect a Union handling fee of a fixed amount per item for the services to be rendered for handling a request for placing goods under the release for free circulation procedure where those goods are sold in distance sales.
Restrictions and controls
- Measure
- Import control
- Measure type
- 714
- Applies to
- All origins
- Value
- Subject to conditions
- Conditions
- Condition
- Other conditions
- Document
- Y949
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- C067
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y069
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Outcome
- Import/export not allowed after control
- Documents to present
- Code
- C067
- Name
- Import authorisation for restricted goods and technologies (Council Regulation (EU) No 267/2012)
- Issued by
- In Spain it is granted by the Secretariat of State for Trade. It is not a letter from the trader.
- If not affected, declare
- Except
- Iran
- Legal basis
- Regulation No 267/2012
- From
- 2017-04-03
- Footnotes
- If the goods declared are described in footnote "DU" linked to the measure a prior import authorisation must be presented for the import, purchase or transport from Iran of the goods and technology listed in Annex I, whether or not originating in Iran (R267/2012).
- Goods 1C202a from the dual use list.
- Goods 1C202b from the dual use list.
- Measure
- Carbon Border Adjustment Mechanism - CBAM
- Measure type
- 775
- Applies to
- All third countries
- Value
- Subject to conditions
- Conditions
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y128
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y134
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y424
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y135
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y237
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y238
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Threshold
- 50.00 /TNE
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Outcome
- Import/export not allowed after control
- Condition
- Other conditions
- Document
- Y128
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y134
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y424
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y135
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y137
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y237
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y238
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Outcome
- Import/export not allowed after control
- Documents to present
- Code
- Y128
- Name
- CBAM account number
- Issued by
- In Spain, authorised CBAM declarant status is granted by the Ministry for the Ecological Transition and the Demographic Challenge.
- Code
- Y238
- Name
- Application to obtain the status of authorised CBAM declarant has been submitted until 31 March 2026
- Template
- https://www.guiex.net/en/taric/templates#declarante-autorizado-cbam-y-codigos-de-la-declaracion
- If not affected, declare
- Code
- Y137
- Name
- De minimis exemption - Exemption by virtue Article 2a. of Regulation (EU) 2023/956
- Template
- https://www.guiex.net/en/taric/templates#declarante-autorizado-cbam-y-codigos-de-la-declaracion
- Other codes
- Except
- Switzerland
- IS
- LI
- Norway
- XC
- XL
- Legal basis
- Regulation 2023/956
- From
- 2026-01-01
- Until
- 2026-12-31
- Footnotes
- Article 2a of Regulation 2023/956: An importer, including any importer with the status of an authorised CBAM declarant, shall be exempted from the obligations under this Regulation, where the net mass of the imported goods in a given calendar year does not cumulatively exceed the single mass-based threshold laid down in point 1 of Annex VII (the “single mass-based threshold”). That threshold shall apply to the total net mass of goods under all CN codes aggregated per importer and per calendar year. In such a case, the importer, including an importer with the status of an authorised CBAM declar…
- CBAM obligations do not apply to goods of EU origin, and in cases where non-CBAM goods of non-EU origin are processed together with EU-origin goods under the inward processing procedure, the resulting processed CBAM goods released for free circulation shall be excluded from CBAM obligations.
- Article 17.7a. of Regulation 2023/956: By way of derogation from Article 4, where an importer or an indirect customs representative has submitted an application in accordance with Article 5 by 31 March 2026, such an importer or indirect customs representative may provisionally continue to import goods until the competent authority takes a decision under this Article.
Depends on the country
- Note
- Without a country, measures that depend on origin or destination are grouped. Give the country to see those that apply to a specific operation.
- Measures
- Measure
- Customs Union Duty
- Countries
- AD
- SM
- Türkiye
- Value
- 0 %
- Measure
- Tariff preference
- Countries
- AL
- AM
- Algeria
- BA
- CARIFORUM
- CI
- CM
- Canada
- Central America
- Chile
- Colombia
- EC
- EEA - European Economic Area
- EU-Canada agreement: re-imported goods
- Value
- 0 %
- More countries
- 41
- Measure
- Tariff preference
- Countries
- GSP - General arrangements
- Value
- 2.4 %
- Measure
- Tariff preference
- Countries
- Mercosur
- Value
- 4.7 %
- Measure
- Tariff preference
- Countries
- NZ
- Value
- 2.9 %
- Measure
- Preferential tariff quota
- Countries
- the United Kingdom
- Value
- 0 %
- Measure
- Import prohibition
- Countries
- North Korea
- Value
- Prohibited
- Measure
- Import control
- Countries
- Iran
- Ukraine
- Value
- Subject to conditions
National taxes
- VAT
- Rate (%)
- 21
- Name
- Standard
- Reason
- Standard rate: the goods are not among those at a reduced rate
- Legal basis
- Ley 37/1992, art. 90.Uno
- Equivalence surcharge
- Rate (%)
- 5.2
- When
- Only if the importer is a retailer under the equivalence surcharge scheme.
- Legal basis
- Ley 37/1992, art. 161
- Special tax on non-reusable plastic packaging
- Name
- Special tax on non-reusable plastic packaging
- Applies
- Possible
- Box 47 code
- 1PL
- Amount
- 0.45
- Unit
- EUR/kg
- Monthly exemption (kg)
- 5
- Explanation
- Only for any non-reusable plastic packaging in which the goods travel.
- Legal basis
- Ley 7/2022, art. 78
National controls
- Control
- Goods subject to end-use
- Authority
- Customs
- Certainty
- May apply if the goods fall within the scope of this control. The national tariff places it on the whole code and it could not be checked against the rules which goods it covers.
- Legal basis
- R 2454/93
Explanations
- Title
- Low-value consignments
- Text
- A duty of 3 EUR per item on consignments with an intrinsic value of no more than 150 EUR sold at a distance to consumers. An item means the goods in the consignment with the same classification, description and origin. It is temporary, from 1 July 2026 to 1 July 2028, and is laid down in Regulation (EU) 2026/382.
- Title
- Union handling fee
- Text
- A fee of 2 EUR that is only charged if document Y126, goods sold at a distance, is declared. Without Y126 the measure does not apply.
- Title
- Carbon Border Adjustment Mechanism
- Text
- Importing these goods requires authorised CBAM declarant status and declaring the CBAM account number. It is not needed if the total mass of CBAM goods you import in the calendar year does not exceed 50 tonnes, except for hydrogen and electricity. In that case the de minimis exemption, Y137, is declared.
- Title
- Proof of origin
- Text
- Paying the preferential duty requires a proof of origin accepted under the agreement with the country of origin, usually a certificate of origin or a statement on origin by the exporter. Without it the preference does not apply.
Warnings
- The reduced rate only applies while quota 09.6006 has a balance left. The Commission publishes the balance.
Binding tariff information
- This code
- Code
- 7609000010
- Total
- 7
- Valid today
- 0
- CN code (8 digits)
- Code
- 76090000
- Total
- 54
- Valid today
- 9
- HS subheading (6 digits)
- Code
- 760900
- Total
- 240
- Valid today
- 76
Notes
- Type
- Legal note
- Title
- Sección XV · METALES COMUNES Y MANUFACTURAS DE ESTOS METALES
- Type
- Legal note
- Title
- Capítulo 76 · ALUMINIO Y SUS MANUFACTURAS
- Type
- Explanatory note
- Title
- Consideraciones generales
- Type
- Legal note
- Title
- Capítulo 83 · MANUFACTURAS DIVERSAS DE METAL COMÚN
Other lines at the same level
- 7609 00 00 30 Aluminium connecting block for automotive air conditioning systems: -with a T6 hardening, -equipped with round stubs with a circumferential outer groove, -with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm, -with a distance between holes of 15 mm or more but not more than 22 mm, -with sockets designed for brazing or clamping, -with mounting holes for M6 or M8 mounting screw, threaded or not, -with a width of 5 mm or more but not more than 16 mm, -for connecting a compressor, a condenser, an evaporator, a chiller and other lines (declarable code)
- 7609 00 00 40 Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers: -with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm, -with a weight of 0,02 kg or more, but not more than 0,25 kg, for use in the manufacture of cooling system in vehicles of Chapter 87 (declarable code)
- 7609 00 00 50 Machined aluminium components: -containing by weight 0,55 %, or more but not more than 0,61 % of magnesium, -containing by weight 0,55 %, or more but not more than 0,61 % of silicon, -with a hardening state of T5 or T6, -with a mass of 0,05 kg or more, but not more than 0,2 kg, for use in the manufacture of CO₂ cooling systems in motor vehicles (declarable code)
- 7609 00 00 60 Aluminium connection block: -with a weight of 3 g or more but not more than 400 g, -manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade, -being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly, -with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line), -with sockets designed for brazing or fastening, -with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm, for the manufacture of automotive cooling and air conditioning systems (declarable code)
- 7609 00 00 90 Other (declarable code)
Data as of 2026-11-13.