7304 51 89 30 · Of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Section XV · BASE METALS AND ARTICLES OF BASE METAL
Sheet for the code
Full sheet on the GUIEX website
Operation
- Direction
- Import
- Date
- 2026-11-16
Duties
- Measure
- Third country duty
- Measure type
- 103
- Applies to
- All origins
- Value
- 0 %
- Legal basis
- Regulation No 1789/2003
- From
- 2005-01-01
- Measure
- Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms
- Measure type
- 117
- Applies to
- All origins
- Value
- 0 %
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C990
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- C990
- Name
- End use authorisation ships and platforms (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Issued by
- Issued by the customs authority. It is not a letter from the trader.
- Legal basis
- Regulation No 2658/87
- From
- 2016-07-01
- Footnotes
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 22 10, 8903 23 10, 8903 32 10, 8903 33 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in…
- Measure
- Non preferential tariff quota
- Measure type
- 122
- Applies to
- All origins
- Value
- 0 %
- Quota order number
- 09.9624
- Except
- Brazil
- China
- IS
- LI
- Norway
- Ukraine
- Legal basis
- Regulation 2026/1457
- From
- 2026-07-01
- Measure
- Union handling fee
- Measure type
- 800
- Applies to
- All origins
- Value
- 2.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- Y126
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- Y126
- Name
- Goods sold in distance sales
- Legal basis
- Regulation 2026/2108
- From
- 2026-11-01
- Footnotes
- Customs authorities shall collect a Union handling fee of a fixed amount per item for the services to be rendered for handling a request for placing goods under the release for free circulation procedure where those goods are sold in distance sales.
Trade defence
- Measure
- Anti-dumping/countervailing statistic
- Measure type
- 566
- Applies to
- All origins
- Except
- Russia
- Legal basis
- Regulation 2016/1036
- From
- 2025-06-03
Agricultural and price measures
- Measure
- Additional duties
- Measure type
- 696
- Applies to
- All origins
- Value
- 50 %
- Except
- IS
- LI
- Norway
- Legal basis
- Regulation 2026/1457
- From
- 2026-07-01
Restrictions and controls
- Measure
- Import control
- Measure type
- 714
- Applies to
- All origins
- Value
- Subject to conditions
- Conditions
- Condition
- Other conditions
- Document
- Y949
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- C067
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y069
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Outcome
- Import/export not allowed after control
- Documents to present
- Code
- C067
- Name
- Import authorisation for restricted goods and technologies (Council Regulation (EU) No 267/2012)
- Issued by
- In Spain it is granted by the Secretariat of State for Trade. It is not a letter from the trader.
- If not affected, declare
- Except
- Iran
- Legal basis
- Regulation No 267/2012
- From
- 2017-04-03
- Footnotes
- If the goods declared are described in footnote "DU" linked to the measure a prior import authorisation must be presented for the import, purchase or transport from Iran of the goods and technology listed in Annex I, whether or not originating in Iran (R267/2012).
- Goods 1C216 from the dual use list.
- Measure
- Import control
- Measure type
- 763
- Applies to
- All third countries
- Value
- Subject to conditions
- Conditions
- Condition
- Other conditions
- Document
- L139
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y824
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y878
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y859
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- L143
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Outcome
- Import/export not allowed after control
- Documents to present
- Code
- L139
- Name
- Import authorisation by virtue of article 3g.7 of Council Regulation (EU) 833/2014
- Issued by
- Issued by the competent authority of the Member State, in Spain the Secretariat of State for Trade. It is not a letter from the trader.
- Code
- L143
- Name
- Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- Issued by
- Issued by the competent authority of the Member State, in Spain the Secretariat of State for Trade. It is not a letter from the trader.
- Code
- Y824
- Name
- Evidence of the country of origin of the iron and steel inputs used for processing of the product in a third country
- Other codes
- Except
- Russia
- Legal basis
- Regulation No 833/2014
- From
- 2023-12-19
- Until
- 2027-12-31
- Footnotes
- It shall be prohibited: (a) to import, directly or indirectly, iron and steel products as listed in Annex XVII into the Union if they: (i) originate in Russia; or (ii) have been exported from Russia; (b) to purchase, directly or indirectly, iron and steel products as listed in Annex XVII which are located or which originated in Russia; (c) to transport iron and steel products as listed in Annex XVII if they originated in Russia or are being exported from Russia to any other country; (d) to import or purchase, as from 30 September 2023, directly or indirectly, iron and steel products as listed …
- Measure
- Import control
- Measure type
- 764
- Applies to
- All origins
- Value
- Subject to conditions
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- Y376
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y377
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y378
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y379
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y380
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y381
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y382
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y383
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y384
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y385
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y386
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y387
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- Y388
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Import/export not allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- C131
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- C132
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- C133
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- C134
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- C135
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- C136
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- C137
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- C138
- Outcome
- Import/export allowed after control
- Condition
- Presentation of a certificate/licence/document
- Document
- C139
- Outcome
- Import/export allowed after control
- Documents to present
- Code
- C131
- Name
- Mill Test Certificate
- Code
- C132
- Name
- Invoice containing information on the country of ‘melt and pour’ and the heat number
- Code
- C133
- Name
- Delivery note containing information on the country of ‘melt and pour’ and the heat number
- Code
- C134
- Name
- Quality certificate and clauses in implemented purchase orders or contracts containing information on the country of ‘melt and pour’ and the heat number
- Code
- C135
- Name
- Long-term declaration from the supplier containing information on the country of ‘melt and pour’ and the heat number
- Code
- C136
- Name
- Cost accounting and production documents containing information on the country of ‘melt and pour’ and the heat number
- Code
- C137
- Name
- Customs document from the exporting country containing information on the country of ‘melt and pour’ and the heat number
- Issued by
- Issued by the customs authority of the exporting country. It is not a letter from the trader.
- Code
- C138
- Name
- Commercial correspondence containing information on the country of ‘melt and pour’ and the heat number
- Code
- C139
- Name
- Production descriptions containing information on the country of ‘melt and pour’ and the heat number
- Code
- Y376
- Name
- Country of ‘melt and pour’ of the imported steel: China
- Code
- Y377
- Name
- Country of ‘melt and pour’ of the imported steel: India
- Code
- Y378
- Name
- Country of ‘melt and pour’ of the imported steel: Indonesia
- Legal basis
- Regulation 2026/1963
- From
- 2026-10-01
- Until
- 2027-09-30
- Footnotes
- At the moment of import, importers shall provide verifiable appropriate evidence, to prove the country in which raw steel or iron was initially produced in liquid form within a steel- or iron-making furnace and subsequently cast into its first solid state (‘country of ‘melt and pour’). The country of ‘melt and pour’ shall be declared by means of one of the TARIC document codes Y376 to Y388. The appropriate evidence, to prove the country of melt and pour shall be declared by means of one of the TARIC document codes C131 to C139. Failure to declare the country of ‘melt and pour’ and the related …
- Measure
- Carbon Border Adjustment Mechanism - CBAM
- Measure type
- 775
- Applies to
- All third countries
- Value
- Subject to conditions
- Conditions
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y128
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y134
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y424
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y135
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y237
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Document
- Y238
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Threshold
- 50.00 /TNE
- Outcome
- Import/export allowed after control
- Condition
- The quantity or the price per unit declared, as appropriate, is equal or less than the specified maximum, or presentation of the required document
- Outcome
- Import/export not allowed after control
- Condition
- Other conditions
- Document
- Y128
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y134
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y424
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y135
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y137
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y237
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y238
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Outcome
- Import/export not allowed after control
- Documents to present
- Code
- Y128
- Name
- CBAM account number
- Issued by
- In Spain, authorised CBAM declarant status is granted by the Ministry for the Ecological Transition and the Demographic Challenge.
- Code
- Y238
- Name
- Application to obtain the status of authorised CBAM declarant has been submitted until 31 March 2026
- Template
- https://www.guiex.net/en/taric/templates#declarante-autorizado-cbam-y-codigos-de-la-declaracion
- If not affected, declare
- Code
- Y137
- Name
- De minimis exemption - Exemption by virtue Article 2a. of Regulation (EU) 2023/956
- Template
- https://www.guiex.net/en/taric/templates#declarante-autorizado-cbam-y-codigos-de-la-declaracion
- Other codes
- Except
- Switzerland
- IS
- LI
- Norway
- XC
- XL
- Legal basis
- Regulation 2023/956
- From
- 2026-01-01
- Until
- 2026-12-31
- Footnotes
- Article 2a of Regulation 2023/956: An importer, including any importer with the status of an authorised CBAM declarant, shall be exempted from the obligations under this Regulation, where the net mass of the imported goods in a given calendar year does not cumulatively exceed the single mass-based threshold laid down in point 1 of Annex VII (the “single mass-based threshold”). That threshold shall apply to the total net mass of goods under all CN codes aggregated per importer and per calendar year. In such a case, the importer, including an importer with the status of an authorised CBAM declar…
- CBAM obligations do not apply to goods of EU origin, and in cases where non-CBAM goods of non-EU origin are processed together with EU-origin goods under the inward processing procedure, the resulting processed CBAM goods released for free circulation shall be excluded from CBAM obligations.
- Article 17.7a. of Regulation 2023/956: By way of derogation from Article 4, where an importer or an indirect customs representative has submitted an application in accordance with Article 5 by 31 March 2026, such an importer or indirect customs representative may provisionally continue to import goods until the competent authority takes a decision under this Article.
Depends on the country
- Note
- Without a country, measures that depend on origin or destination are grouped. Give the country to see those that apply to a specific operation.
- Measures
- Measure
- Customs Union Duty
- Countries
- AD
- Value
- 0 %
- Measure
- Non preferential tariff quota
- Countries
- Argentina
- Brazil
- China
- EU
- FTA partners
- SG
- Ukraine
- Value
- 0 %
- Measure
- Tariff preference
- Countries
- Algeria
- CARIFORUM
- CI
- CM
- Central America
- Chile
- Colombia
- EEA - European Economic Area
- Eastern and Southern Africa States
- Egypt
- FJ
- GH
- GSP+ (incentive arrangement for sustainable development and good governance)
- GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms)
- Value
- 0 %
- More countries
- 20
- Measure
- Import prohibition
- Countries
- Belarus
- Value
- Prohibited
- Measure
- Restriction on entry into free circulation
- Countries
- North Korea
- Value
- Subject to conditions
- Measure
- Definitive anti-dumping duty
- Countries
- Russia
- Value
- Subject to conditions
- Measure
- Definitive anti-dumping duty
- Countries
- Russia
- Value
- 35.8 %
- Measure
- Anti-dumping/countervailing duty - Control
- Countries
- Türkiye
- Measure
- Import control
- Countries
- Iran
- North Korea
- Russia
- Ukraine
- Value
- Subject to conditions
- Measure
- Import control on restricted goods and technologies
- Countries
- Iran
- North Korea
- Value
- Subject to conditions
National taxes
- VAT
- Rate (%)
- 21
- Name
- Standard
- Reason
- Standard rate: the goods are not among those at a reduced rate
- Legal basis
- Ley 37/1992, art. 90.Uno
- Equivalence surcharge
- Rate (%)
- 5.2
- When
- Only if the importer is a retailer under the equivalence surcharge scheme.
- Legal basis
- Ley 37/1992, art. 161
- Special tax on non-reusable plastic packaging
- Name
- Special tax on non-reusable plastic packaging
- Applies
- Possible
- Box 47 code
- 1PL
- Amount
- 0.45
- Unit
- EUR/kg
- Monthly exemption (kg)
- 5
- Explanation
- Only for any non-reusable plastic packaging in which the goods travel.
- Legal basis
- Ley 7/2022, art. 78
Explanations
- Title
- Union handling fee
- Text
- A fee of 2 EUR that is only charged if document Y126, goods sold at a distance, is declared. Without Y126 the measure does not apply.
- Title
- Carbon Border Adjustment Mechanism
- Text
- Importing these goods requires authorised CBAM declarant status and declaring the CBAM account number. It is not needed if the total mass of CBAM goods you import in the calendar year does not exceed 50 tonnes, except for hydrogen and electricity. In that case the de minimis exemption, Y137, is declared.
- Title
- Proof of origin
- Text
- Paying the preferential duty requires a proof of origin accepted under the agreement with the country of origin, usually a certificate of origin or a statement on origin by the exporter. Without it the preference does not apply.
Warnings
- The reduced rate only applies while quota 09.9624 has a balance left. The Commission publishes the balance.
- The reduced rate only applies while quota 09.9751 has a balance left. The Commission publishes the balance.
- The reduced rate only applies while quota 09.9752 has a balance left. The Commission publishes the balance.
- The reduced rate only applies while quota 09.9934 has a balance left. The Commission publishes the balance.
- The reduced rate only applies while quota 09.9932 has a balance left. The Commission publishes the balance.
- The reduced rate only applies while quota 09.9753 has a balance left. The Commission publishes the balance.
- The reduced rate only applies while quota 09.9933 has a balance left. The Commission publishes the balance.
Binding tariff information
- This code
- Code
- 7304518930
- Total
- 6
- Valid today
- 2
- CN code (8 digits)
- Code
- 73045189
- Total
- 13
- Valid today
- 5
- HS subheading (6 digits)
- Code
- 730451
- Total
- 31
- Valid today
- 9
Notes
- Type
- Legal note
- Title
- Sección XV · METALES COMUNES Y MANUFACTURAS DE ESTOS METALES
- Type
- Legal note
- Title
- Capítulo 73 · MANUFACTURAS DE FUNDICIÓN, DE HIERRO O ACERO
- Type
- Explanatory note
- Title
- Consideraciones generales
- Type
- Explanatory note
- Title
- Tubos y perfiles huecos, sin soldadura (sin costura), de hierro o acero
- Type
- Legal note
- Title
- Capítulo 83 · MANUFACTURAS DIVERSAS DE METAL COMÚN
Other lines at the same level
- 7304 51 89 99 Other (declarable code)
Data as of 2026-11-13.