3920 99 28 00 · Other
Section VII · PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF
Lines at this level
- 3920 99 28 40 Polymer film containing the following monomers: - poly (tetramethylene ether glycol), - bis (4-isocyanotocyclohexyl) methane, - 1,4-butanediol or 1,3-butanediol, - with a thickness of 0,25 mm or more but not more than 5,0 mm, - embossed with a regular pattern on one surface, - and covered with a release sheet (declarable code)
- 3920 99 28 50 Thermoplastic polyurethane film (TPU) based on an aliphatic polycaprolactone (PCL), transparently backed on one side with a removable protective film (PET film), with a light transmission of more than 93% (according to DIN EN ISO 13468-1), with a thickness of 25μm or more but not more than 500μm (declarable code)
- 3920 99 28 65 Matt, thermoplastic polyurethane foil in rolls with: - a width of 1640 mm (± 10 mm), - a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457), - a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287), - a thickness of more than 365 µm but not more than 760 µm, - a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)), - an elongation to break of 470 % (as determined by the method: EN ISO 527) (declarable code)
- 3920 99 28 70 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: - microspheres with a coating of metal, whether or not alloyed with gold, - an adhesive layer, - with a protective layer of silicone or poly(ethylene terephthalate) on one side, - with a protective layer of poly(ethylene terephthalate) on the other side, and - with a width of 5 cm or more but not more than 100 cm - with a length of not more than 2 000 m (declarable code)
- 3920 99 28 90 Other (declarable code)
Data as of 2026-11-13.