3919 90 80 24 · Reflecting laminated sheet: - consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, - covered on both sides with one or more layers of plastic material and - covered on one side with an adhesive layer and a release sheet
Section VII · PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF
Sheet for the code
Full sheet on the GUIEX website
Operation
- Direction
- Import
- Date
- 2026-11-16
Duties
- Measure
- Third country duty
- Measure type
- 103
- Applies to
- All origins
- Value
- 6.5 %
- Legal basis
- Regulation 2016/1821
- From
- 2017-01-01
- Measure
- Autonomous tariff suspension
- Measure type
- 112
- Applies to
- All origins
- Value
- 0 %
- Except
- Belarus
- Russia
- Legal basis
- Regulation 2025/2605
- From
- 2026-01-01
- Footnotes
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
- Measure
- Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms
- Measure type
- 117
- Applies to
- All origins
- Value
- 0 %
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C990
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- C990
- Name
- End use authorisation ships and platforms (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Issued by
- Issued by the customs authority. It is not a letter from the trader.
- Legal basis
- Regulation No 2658/87
- From
- 2017-01-01
- Footnotes
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 22 10, 8903 23 10, 8903 32 10, 8903 33 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in…
- Measure
- Airworthiness tariff suspension
- Measure type
- 119
- Applies to
- All origins
- Value
- 0 %
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C119
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- C119
- Name
- Authorised Release Certificate — EASA Form 1 (Appendix I to Annex I to Regulation (EU) No 748/2012), or equivalent certificate
- Issued by
- Signed by the approved production or maintenance organisation that made or serviced the part.
- Legal basis
- Regulation 2018/1517
- From
- 2018-11-01
- Footnotes
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to…
- Measure
- Low-value consignment customs duty
- Measure type
- 107
- Applies to
- All origins
- Value
- 3.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- C127
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Import is not allowed
- Condition
- Presentation of a certificate/licence/document
- Document
- C128
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- C129
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Document
- Y081
- Outcome
- Apply the mentioned duty
- Documents to present
- Legal basis
- Regulation 2026/382
- From
- 2026-11-01
- Footnotes
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446. The merchant product identifier, the non-standardised manufacturer product identifier and, if it exists for t…
- Measure
- Union handling fee
- Measure type
- 800
- Applies to
- All origins
- Value
- 2.00 EUR
- Conditions
- Condition
- Presentation of a certificate/licence/document
- Document
- Y126
- Outcome
- Apply the mentioned duty
- Condition
- Presentation of a certificate/licence/document
- Outcome
- Measure not applicable
- Documents to present
- Code
- Y126
- Name
- Goods sold in distance sales
- Legal basis
- Regulation 2026/2108
- From
- 2026-11-01
- Footnotes
- Customs authorities shall collect a Union handling fee of a fixed amount per item for the services to be rendered for handling a request for placing goods under the release for free circulation procedure where those goods are sold in distance sales.
Restrictions and controls
- Measure
- Import control of fluorinated greenhouse gases
- Measure type
- 724
- Applies to
- All origins
- Value
- Subject to conditions
- Conditions
- Condition
- Other conditions
- Document
- Y152
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y986
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y160
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y169
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Outcome
- Import/export not allowed after control
- Condition
- Other conditions
- Document
- Y123
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y054
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y163
- Outcome
- Import/export allowed after control
- Condition
- Other conditions
- Document
- Y121
- Outcome
- Import/export allowed after control
- Documents to present
- Code
- Y054
- Name
- Goods labelled according to the provisions of Article 12 of Regulation (EU) 2024/573
- Template
- https://www.guiex.net/en/taric/templates#registro-en-el-f-gas-portal-y-codigos-de-la-declaracion
- Code
- Y121
- Name
- Tonnes of CO₂ equivalent of bulk gases and of gases contained in products or equipment, and parts thereof
- Template
- https://www.guiex.net/en/taric/templates#registro-en-el-f-gas-portal-y-codigos-de-la-declaracion
- Code
- Y123
- Name
- Undertaking registered in the F-Gas Portal according to Article 20 of Regulation (EU) 2024/573
- Issued by
- It is the company's own registration in the European Commission's fluorinated gas portal. No letter is needed.
- Code
- Y163
- Name
- Net mass of fluorinated greenhouse gases charged in products and equipment
- If not affected, declare
- Code
- Y160
- Name
- Goods other than those falling under the applicable provisions of Regulation (EU) 2024/573
- Template
- https://www.guiex.net/en/taric/templates#y160-mercancia-no-sujeta-al-reglamento-de-gases-fluorados
- Code
- Y152
- Name
- Exemption from import prohibition, granted for repair or servicing of existing equipment, according to the second paragraph of Article 11.1 of Regulation (EU) 2024/573
- Template
- https://www.guiex.net/en/taric/templates#y152-importacion-para-reparacion-o-revision-de-aparatos
- Code
- Y169
- Name
- Products and equipment, including parts (excluding military and repair exemption) listed in Annex IV containing F-gases or relies upon F-gases not subject to prohibition as imposed by Article 11.1. (Reg 2024/573).
- Template
- https://www.guiex.net/en/taric/templates#y169-aparatos-con-gases-fluorados-no-prohibidos
- Other codes
- Legal basis
- Regulation 2024/573
- From
- 2025-06-25
- Footnotes
- By virtue of Article 4(6) of Regulation (EU) 2024/573, the placing on the market of fluorinated greenhouse gases shall be prohibited, unless importers provide evidence that any trifluoromethane, produced as a by-product during the production process of the fluorinated greenhouse gases has been destroyed or recovered for subsequent use, using best available techniques. By virtue of Article 11.1. of Regulation (EU) 2024/573, the placing on the market of products and equipment, including parts thereof, listed in Annex IV, with an exemption for military equipment, shall be prohibited from the date…
Depends on the country
- Note
- Without a country, measures that depend on origin or destination are grouped. Give the country to see those that apply to a specific operation.
- Measures
- Measure
- Customs Union Duty
- Countries
- AD
- SM
- Türkiye
- Value
- 0 %
- Measure
- Tariff preference
- Countries
- AL
- AM
- Algeria
- BA
- CARIFORUM
- CI
- CM
- Canada
- Central America
- Chile
- Colombia
- EC
- EEA - European Economic Area
- EU-Canada agreement: re-imported goods
- Value
- 0 %
- More countries
- 43
- Measure
- Tariff preference
- Countries
- Mercosur
- Value
- 5.2 %
- Measure
- Import control
- Countries
- Belarus
- Russia
- Ukraine
- Value
- Subject to conditions
National taxes
- VAT
- Rate (%)
- 21
- Name
- Standard
- Reason
- Standard rate: the goods are not among those at a reduced rate
- Legal basis
- Ley 37/1992, art. 90.Uno
- Equivalence surcharge
- Rate (%)
- 5.2
- When
- Only if the importer is a retailer under the equivalence surcharge scheme.
- Legal basis
- Ley 37/1992, art. 161
- Special tax on non-reusable plastic packaging
- Name
- Special tax on non-reusable plastic packaging
- Applies
- Possible
- Box 47 code
- 1PL
- Amount
- 0.45
- Unit
- EUR/kg
- Monthly exemption (kg)
- 5
- Explanation
- Only for any non-reusable plastic packaging in which the goods travel.
- Legal basis
- Ley 7/2022, art. 78
Explanations
- Title
- Low-value consignments
- Text
- A duty of 3 EUR per item on consignments with an intrinsic value of no more than 150 EUR sold at a distance to consumers. An item means the goods in the consignment with the same classification, description and origin. It is temporary, from 1 July 2026 to 1 July 2028, and is laid down in Regulation (EU) 2026/382.
- Title
- Union handling fee
- Text
- A fee of 2 EUR that is only charged if document Y126, goods sold at a distance, is declared. Without Y126 the measure does not apply.
- Title
- Proof of origin
- Text
- Paying the preferential duty requires a proof of origin accepted under the agreement with the country of origin, usually a certificate of origin or a statement on origin by the exporter. Without it the preference does not apply.
Binding tariff information
- This code
- Code
- 3919908024
- Total
- 1
- Valid today
- 0
- CN code (8 digits)
- Code
- 39199080
- Total
- 286
- Valid today
- 76
- HS subheading (6 digits)
- Code
- 391990
- Total
- 2828
- Valid today
- 274
Notes
- Type
- Legal note
- Title
- Sección VII · PLÁSTICO Y SUS MANUFACTURAS; CAUCHO Y SUS MANUFACTURAS
- Type
- Legal note
- Title
- Capítulo 39 · PLÁSTICO Y SUS MANUFACTURAS
- Type
- Explanatory note
- Title
- Consideraciones generales
- Type
- Explanatory note
- Title
- Placas, láminas, hojas, cintas, tiras y demás formas planas, autoadhesivas, de plástico, incluso en rollos
Other lines at the same level
- 3919 90 80 20 Polyester film: - coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and - on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner (declarable code)
- 3919 90 80 23 Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner (declarable code)
- 3919 90 80 30 Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesive layer and a release sheet (declarable code)
- 3919 90 80 31 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film (declarable code)
- 3919 90 80 33 Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm (declarable code)
- 3919 90 80 45 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm (declarable code)
- 3919 90 80 48 Polytetrafluoroethylene film, -with a thickness of 50 µm or more, -with a width of 6,30 mm or more but not more than 740 mm, -an elongation at break of not more than 200 %, and -coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm (declarable code)
- 3919 90 80 49 Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet (declarable code)
- 3919 90 80 50 Self-adhesive reflecting sheet whether or not in segmented pieces, - whether or not containing a watermark, - with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: - a layer of acrylic or vinyl polymer, - a layer of poly(methyl methacrylate) or polycarbonate containing microprisms, - a layer of metallisation, - an adhesive layer, and - a release sheet - whether or not containing an additional layer of polyester (declarable code)
- 3919 90 80 53 Acrylic foam tape: - covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive, - covered on the other side with an acrylic pressure sensitive adhesive, - covered on one or both sides with a release sheet, - with a peel adhesion of more than 25 N/cm (at an angle of 90° as determined by the ASTM D 3330 method) (declarable code)
- 3919 90 80 54 Poly(vinyl chloride) film, on one side covered with - a polymer layer - an adhesive layer - a release liner, on one side embossed, containing oblate spheres; whether or not on the other side covered with an adhesive layer and a metallised polymer layer (declarable code)
- 3919 90 80 55 Black polyvinyl chloride film: -with a gloss of more than 25 degrees according to ASTM D 2457, -whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner for use in the manufacture of die-cut films for interior and exterior surfaces of cars (declarable code)
- 3919 90 80 56 Transparent polyethylene film coated on one side with an aqueous acrylic adhesive, of a thickness of 30 μm to 50 μm, put up in rolls of a width of 52 cm or more but not more than 154 cm (declarable code)
- 3919 90 80 57 Self-adhesive polycarbonate film, printed, whether or not arched, with: -a thickness of 0,3 mm or more, but not more than 0,4 mm, -minimum dimensions of 63 mm x 15 mm, -maximum dimensions of 278 mm x 117 mm, -a weight of not more than 5 g per piece, intended for integration into combined instrument panels of passenger cars (declarable code)
- 3919 90 80 58 Biaxially-oriented film of poly(methyl methacrylate), with a thickness of 20 μm or more but not more than 90 μm, covered on one side with an adhesive layer and a release sheet (declarable code)
- 3919 90 80 65 Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner (declarable code)
- 3919 90 80 70 Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad (declarable code)
- 3919 90 80 80 Self adhesive reflecting film, consisting of several layers including: - a copolymer of acrylic resin, - polyurethane, - a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, - glass microspheres, and - an adhesive layer, with a release liner on one or both sides (declarable code)
- 3919 90 80 82 Reflecting film consisting of: - a polyurethane layer, - a glass microspheres layer, - a metallised aluminium layer, and - an adhesive, covered on one or both sides with a release liner, - whether or not a poly(vinyl chloride) layer, - a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use (declarable code)
- 3919 90 80 83 Reflector or diffuser sheets, in rolls, -for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or -for equal transmission and distribution of light, intended for LCD modules (declarable code)
- 3919 90 80 99 Other (declarable code)
Data as of 2026-11-13.